Con-Cor Common N Scale Parts List


     (Not all parts listed are in stock. Even if we are out of a part, we continue to list it, for it might be in stock at one of the hundreds of dealers or distributors that buy from us, and need to use our website as a reference tool for product descriptions and pricing.)


      VERY IMPORTANT NOTICE: We DO NOT maintain a repair service for items that are not newly purchased or bought used at a Train Show, or Train Flea Market. You will have to locate someone in your local area to handle the repairs, but we would be happy to sell you or the repair person the needed parts (if available). Your best source would be a local hobby shop, or contact a local Model Railroad Club to find a member who does repairs for other club members. A list of Model Railroad Clubs can be found on the Kalmbach Publishing website: www.Trains.com.


     Note #1) This list is not intended to be all inclusive of all parts available, but rather a list of the most commonly requested parts. If you need parts not shown here, please contact us via E-mail at concor@con-cor.com or by mail at the address listed below, and we will notify you on the availability and price of other parts.

      Note #2) We have been manufacturing and importing model trains since 1962. Many items have come and gone, and other items have had major changes, improvements, and modifications to the tooling. Once tooling is modified we cannot go back and make the "old version" of that part. So eventually we do run out of parts for old versions, or discontinued models. We apologize in advance if you require parts for an older model and they are not available. A rule of thumb would be if the item is more than 6-7 years old we probably do not have parts for it any longer. For older items such as these your best option is to find a cheap used one at a Train Show or Train Flea Market that you can cannibalize for parts to fix your other model.

      Note #3) Con-Cor's Customer Satisfaction Policy: If you purchase (or receive as a gift) a new model which is missing parts, or a locomotive that does not run properly, our policy is to replace parts, fix, or exchange the item for you. If it is a broken or missing part which is obvious to you, and you have the skill level to fix it, we would be happy to send you the appropiate parts at no charge. Just E-mail us at concor@con-cor.com, or write to us at the address listed below with your needs. If you feel you need to return the item to us for repair or replacement, then return to the address below, but make sure you insure it for full value. We are not responsible for items that are lost en-route to us.

      When returning any item, make sure you include with the item a piece of paper with your full name, and return address as well as a comment on the nature of the problem. (You would be surprised by how many returns and letters we get from people with NO RETURN address included!)

Return to: (Make sure you INSURE the package!)

Note You must call for a Return Authorization Number before sending the package back, packages without an Authorized "RA" Number WILL NOT be processed.

Customer Service Dept.
RA # _______________
Con-Cor International, Ltd.
8101 E. Research Court
Tucson, Arizona 85710-6758

      Note #4)If you have modified a new item in any way, for example, added Micro-Train couplers, or special lighting or DCC controls, or super detailed the model, we will not work on it, as we will not take the responsibility for replacing or repairing any of the special "add-on" features you have made to the model.

      Note #5) Add $8.95 to all orders under $149.00 to cover handling and shipping. We cannot ship parts "COD" due the very high COD charges by UPS and the Postal Service. You can pay for your order by check, money order, or one of the following credit cards: MasterCard, Visa, or Discover Card. Minimum order for Parts/ Merchandise is $20.00 plus appropiate Shipping/Handing charges. You can order on line at www.con-cor.com/roundhse/orders.htm (Merchandise and parts maybe combined in one order to meet the $20.00 Minimum.)

      Note #6) Please allow a minimum of 3-4 weeks for parts order to be processed, we do not get a lot of parts orders and have only have one staff member who takes care of parts on a part time basis.

      Note #7) Just because we have a part listed here, does not mean we definitely will have it in stock when you contact us, this page is only intended as a guide to the commonly requested parts and all parts orders are subject to availability at the time the order is received. An Alternative source for parts is Model Train Shows and Flea markets where you may be able to find a used model you can buy cheaply and canabalize for the parts you need.

      Note #8) Rivarossi N Steam Locos. We imported from the mid-1970's until the middle 1990's many "N" Steam locomotives made for us by Rivarossi in Italy. But Rivarossi filed for Bankruptcy in Italy in 2002 and was liquidated in 2003, so no further parts have been available from Rivarossi for the last 10 years. We have very few parts left for Rivarossi since once modelers learned of the Rivarossi bankruptcy they pretty well cleaned out our stock of parts.

     And by the way, our company lost about $400,000 in tooling in the Rivarossi Bankruptcy mess.




Note: If you are looking for information on the Con-Cor Trains Micro-Trains compatible couplers
for our current or old Con-Cor rolling stock with the "rapido flapper couplers", then click the link below...

Take me to the Con-Cor Trains Micro-Trains Compatible Coupler conversions.




"N" Scale Collector Sets

Note: We are listing only the most Common parts for our Collector Sets
If you need a part not listed, please contact our office via Email to see if we can supply for you.



"N" Original 1934 Pioneer Zephyr 3 Car Train Set

Note #1: We do not assign stock Numbers to these parts, order by Description and Scale.
Note #2: Special Edition "N" Silver Streak Version uses same parts, except bodies are decorated differently.
Note #3: Click here to go to an Index of "N" Assembly Diagrams that are available on line.
                  Sorry, not all items will have Diagrams available.

  • "N" Original Zephyr Replacement Motor: $34.98 ea
  • "N" Original Zephyr Burlington Locomotive Car Body $29.98
  • "N" Original Zephyr Burlington Body for Middle or Tail end -Observation Car $29.98
  • "N" Original Zephyr Silver Streak Locomotive Car Body $29.98
  • "N" Original Zephyr Silver Streak Body for Middle or Tail end -Observation Car $29.98
  • "N" Original Zephyr Burlington Printed Circuit Board for Locomtoive $24.98 each (note the motor control circuit board is in the middle car)
  • "N" Original Zephyr Printed Circuit Board for the middle car (with Decoder connector mounted) $34.98 ea
  • "N" Original Zephyr Printed Circuit Board for the tail-end Observation $24.98
  • "N" Original Zephyr Powered Truck (front of Locomotive)) $29.98 ea
  • "N" Original Zephyr Powered Truck (rear of Locomotive) $29.98 ea
  • "N" Original Zephyr Non-Powered Truck (between car 2 and tail end observation car )$24.98 ea
  • "N" Original Zephyr Non-Powered Truck (Rear of Tail end end - Observation car )$24.98 ea
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might not also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.) All parts available in limited quantities only, and subject to prior sale.





"N" Original 1934 Union Pacific M-10000 3 Car Train Set

Note #1: We do not assign stock Numbers to these parts, order by Description and Scale.
Note #2: Special Edition "N" Silver Streak Version uses same parts, except bodies are decorated differently.
Note #3: Click here to go to an Index of "N" Assembly Diagrams that are available on line.
                  Sorry, not all items will have Diagrams available.

  • "N" Original M-10000 Replacement Motor: $34.98 ea
  • "N" Original M-10000 Original 1934 Paint Scheme Locomotive Car Body $29.98
  • "N" Original M-10000 Original 1934 Paint Scheme Body for Middle or Tail end -Observation Car $29.98
  • "N" Original M-10000 Printed Circuit Board for Locomtoive $24.98 each (note the motor control circuit board is in the middle car)
  • "N" Original M-10000 Printed Circuit Board for the middle car (with Decoder connector mounted) $34.98 ea
  • "N" Original M-10000 Printed Circuit Board for the tail-end Observation $24.98
  • "N" Original M-10000 Powered Truck (front of Locomotive)) $29.98 ea
  • "N" Original M-10000 Powered Truck (rear of Locomotive) $29.98 ea
  • "N" Original M-10000 Non-Powered Truck (between car 2 and tail end observation car) $24.98 ea
  • "N" Original Zephyr Non-Powered Truck (Rear of Tail end end - Observation car )$24.98 ea
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.






"N" Original 1934 Union Pacific M-10000 3 Car Train Set

Note #1: We do not assign stock Numbers to these parts, order by Description and Scale.
Note #2: Special Edition "N" Silver Streak Version uses same parts, except bodies are decorated differently.
Note #3: Click here to go to an Index of "N" Assembly Diagrams that are available on line.
                  Sorry, not all items will have Diagrams available.

  • "N" Areo Train Replacement Motor: $34.98 ea
  • "N" Areo Train Original 1955 Paint Scheme Locomotive Car Body $29.98
  • "N" Areo Train Original 1955 Paint Scheme Body for Middle Coachs or Tail end -Observation Car $29.98
  • "N" Areo Train Printed Circuit Board for Locomtoive $24.98 each (note the motor control circuit board is in the lst Coach car)
  • "N" Areo Train Printed Circuit Board for the regular car (with Decoder connector mounted) $34.98 ea
  • "N" Areo Train Printed Circuit Board for the tail-end Observation $24.98
  • "N" Areo Train Powered Truck (front of Locomotive) $29.98 ea
  • "N" Areo Train Powered Truck (rear of Locomotive) $29.98 ea
  • "N" Areo Train Non-Powered Truck (between car 2 and 3 and tail end observation car )$24.98 ea
  • "N" Areo Train Non-Powered Truck (Rear of Tail end end - Observation car )$24.98 ea
  • "N" Extra weights for tail end Observation (To improve tracking) NO Charge.
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.




"N" Scale Diesel Locomotives

Complete body shells are available either decorated or undecorated for most locomotives. Not all roadnames are in stock at all times for decorated shells.

Please Email Customer Service Dept for availability. (E-mail link at the bottom of this page). Please understand that we do not keep a computer inventory of parts, so if you call no one can tell you on the phone if we may have the part, so avoid mistakes and tell you we have something (and you wanted N and we thought you wanted the HO Equilivent, we request you send us the full description of what you need via Email.And allow a few weeks for us to check if we can find that part for you.

"N" ALCO PA-1/PB-1 (Pre-2003 Production)

  • "A" Shell (complete with trim parts) 29.98
  • "B" Shell (complete with trim parts) 24.98
  • Windshield only (2 pak) 9.50
  • Fuel Tank #09-200019 4.00
  • Horn Set,4 pak #09-200003 5.98
  • Pilot for Powered PA-1 5.00 (Please specify color when ordering)
  • PIlot for non-powered PA-1 5.00 (Please specify color when ordering)
  • Motor #09-200051 29.98
  • Note: motor only fits current production (1994-to 2002 models)
  • Power truck sold out
  • Wheel Wipers #09-270037 (4 pak) 6.98
  • Main spur gears (4) #09-200012 7.98
  • Geared wheelsets #09-200018 5.98 each wheel/axle assembly
  • Headlight with diode #0430-6675 6.98 set
  • Worm + Shaft w/CupGear 7.98 each (2 sets Required for each PA-1)
  • Truck Side Frames 6.98 each (Please specify Front or Back, PA-1 or PB-1, powered or non- powered AND color of sideframe when ordering.)
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.

ALCO PA-1/PB-1 (After 2003 Production)

  • "A" Shell (complete with trim parts) 29.98
  • "B" Shell (complete with trim parts) 24.98
  • Windshield only (2 pak) 9.50
  • Fuel Tank #09-200019 4.00
  • Horn Set, 4 pak #09-200003 5.98
  • Pilot for Powered PA-1 5.00 (Please specify color when ordering)
  • PIlot for non-powered PA-1 5.00 (Please specify color when ordering)
  • Motor #09-200551 29.98
  • Power truck 24.98 ea (Specify Front or Rear)
  • Wheel Wipers #09-270037 (4 pak) 6.98
  • Main spur gears (4) #09-200012 7.98
  • Geared wheelsets #09-200018 5.98 each wheel/axle assembly
  • Headlight with diode #0430-6675 6.98 set
  • Replacement PCB Board $24.98 ea
  • Worm + Shaft w/CupGear 7.98 each (2 sets Required for each PA-1)
  • Truck Side Frames 6.98 each (Please specify Front or Back, PA-1 or PB-1, powered or non- powered AND color of sideframe when ordering.)
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.

"N" EMD E-7A/E-7B

  • "A" Shell (complete with trim parts) 29.98
  • "B" Shell (complete with trim parts) 24.98
  • Motor #09-200051 29.98
  • Power truck 24.98 each
  • Main spur gears (4) #09-200012 7.98 set
  • Geared wheelsets #09-200018 5.98 each
  • Headlight/diode #0430-6675 6.98
  • Fuel Tank for powered E7-A 4.00
  • Pilot for Powered E7-A 5.00 (Please specify color when ordering)
  • PIlot for non-powered E7-A 5.00 (Please specify color when ordering)
  • Worm + Shaft w/CupGear 7.98 each (2 Required for each powered E7-A) Truck Side Frames 6.98 each (Please specify Front or Back, E7-A or E7-B, powered or non- powered AND color of sideframe when ordering.)
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.


"N" EMD E-8A/E-8B nnnnnnnnnnnnnn

  • "A" Shell (complete with trim parts) 29.98
  • "B" Shell (complete with trim parts) 24.98
  • Motor #09-200051 29.98
  • Power truck sold out
  • Main spur gears (4) #09-200012 7.98 set
  • Geared wheelsets #09-200018 5.98 each (Assembled wheelset with gear mounted)
  • Headlight with diode #0430-6675 6.98
  • Fuel Tank for powered E7-A 4.98
  • Pilot for Powered E8-A 5.00 (Please specify color when ordering)
  • PIlot for non-powered E8-A 5.00 (Please specify color when ordering)
  • Worm + Shaft w/CupGear 7.98 each (2 Required for each E8-A)
  • Truck Side Frames 6.98 each (Please specify Front or Back, E8-A or E8-B, powered or non- powered AND color of sideframe when ordering.)
  • Click here to Enter your parts orders manually. On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.


"N" ALCO DL-109

"A" Shell (complete with trim parts) 29.98 Motor #09-200051 29.98 Power truck $24.98 each Main spur gears (4) $7.98 Geared wheelsets #09-200018 5.98 each (wheelset/ axle with gear mounted) Headlight with diode #0430-6675 6.98 Pilot for Powered Dl-109 5.00 (Please specify color when ordering) PIlot for non-powered DL-109 5.00 (Please specify color when ordering) Worm + Shaft w/CupGear 7.98 each (2 Required for each DL-109) Truck Side Frames 5.98 each (Please specify Front or Back, DL-109 powered or non- powered AND color of sideframe when ordering.)

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.


  • Note:Con-Cor Trains is in the midst of re-vamping the old "N" U-50/ Gas Turbine Tooling and we hope to have new models ready later in 2012. Please click here for current information:
    Information on New "N" U-50 / Gas Turbine Project

    Shell (complete) 29.98 (Sorry NO Union Pacific Shells available now) Motor #09-200051 29.98 Power truck (front/rear) 24.98 each Geared wheelsets 6.98 each (assembled wheelset/axle with gear mounted) Dummy truck 19.98 each Front Pilot 9.98 each Rear Pilot 9.98 each Spur Gear Set 7.98 each Headlight with diode #430-6675 6.98 Worm + Shaft w/CupGear 7.98 each (2 Required for each U-50)

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.

  • "N" EMD SW-1200 "Cow" or "Calf" (Discontinued item, originaly made by Rivarossi, used old "round motor")
    Please do not confuse with newer Con-Cor Trains MP-15 diesel switcher listed below.

    Shell (complete)(specify body style) 24.98 Motor 29.98 Power truck (front/rear) 24.98 each Geared wheelsets 6.98 each (Assembly of wheels on axle, with gear mounted) Headlight 7.98 each Spur Gear Set 7.98 each



    "N" EMD MP-15 "Yard Switcher"

    Shell (complete)(specify roadname) 24.98 Motor 29.98 Power truck (front/rear) 24.98 each Geared wheelsets 6.98 each (Assembly of wheels on axle, with gear mounted) Headlight 7.98 each Spur Gear Set 7.98 each



    "N" Scale Gas Turbine Locomotives

    Note:Con-Cor Trains is in the midst of re-vamping the old "N" U-50/ Gas Turbine Tooling and we hope to have new models ready later in 2012. Please click here for current information:
    Information on New "N" U-50 / Gas Turbine Project

       
    
                  

    "A" Shell (complete with trim parts 34.98 (Sorry NO Union Pacific Shells are available anymore). Tender Shell (complete with trim parts) not available at this time Complete Tender only... not available at this time. Motor 29.98 Power truck (front/rear) 24.98 each Dummy truck 19.98 each Spru Gear Set 7.98each Geared wheelsets 6.98 each (Complete wheelset/ axle assembly with gear) Headlight with diode 6.98 Worm + Shaft w/CupGear 7.98 each (2 Required for each Gas Turbine)

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.

  • kkkkkkkkkkkkkkkkkk

    "N" Scale Budd Cars (RDCs)

    Complete body shells are available either decorated or undecorated for most locomotives. Not all roadnames are in stock at all times for decorated shells. Contact Customer Service Dept for availability.

    Shell (complete)(specify body style) 19.98 (Available RDC-1, RDC-2 and RDC-3 Models) Motor 29.98 Power truck (front/rear) 19.98 each Geared wheelsets 4.98 each (Assembly of wheelsets on axle with gear mounted) Dummy Truck 10.98 each Motor Mount for powered RDC 3.98 each

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.


  • "N " Steam Locomotives

    Note: Rivarossi went bankrupt in 2002, and was liquidated in 2003. We will not be able to get any further parts from them. We have only a limited qty on hand, and those are quickly dwindling. We suggest you check on Ebay, or at Model Train Flea markets/ shows for old used Rivarossi models you can buy for spare parts. Just having them listed here does not mean we have them in stock, many dealers have Rivarossi parts (but we have no way of knowing who they are, and refer to this list for pricing).


    USRA Pacific 4-6-2 (Made by Rivarossi)

     

    Boiler shell $24.98 Motor (Late style ONLY) 34.98 (This is eliptical shape motor, old Round motors NOT available) Headlight 6.00 Tender (undec only) Not available at this time Traction Tires 4 pak #08-110528 $10.98 pak (very limited qty available) Trailing Truck #08-110537 $19.98 each (same as for Mikado) Long Haul Tender Shell $24.98 each undecorated


    J3A Hudson 4-6-4 (Made by Con-Cor )

    NOTE #1): We models made prior to 1991 used a different motor and die-cast frame.
    We DO NOT have any motors or frames for these models prior to 1991.

    NOTE #2): Con-Cor Trains is currently re-vamping the old J3a 4-6-4 Hudson to be DCC compatible. We expect this project to not be done until late 2012 or early 2013. Please watch our Web site for updates as they are known.
    But since to work on DCC we have to completely change the chassis of both the locomotive and tender,
    the "new" J3a will in no way be compatible or use many of the parts from the "old" J3a. Note #2:

     

    Boiler shell (standard or streamlined) 24.98 Tender shell only 19.98 Motor 09-300051 34.98 Headlight 6.98 Tender (standard) 001-003000 $39.98 Tender (streamlined) 001-003070 $39.98 Traction Tires, pak of 4 001-300028 $10.98


  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.

    USRA Mikado 2-8-2 (Made by Rivarossi)

     

    Boiler shell 24.98 Motor (Late style ONLY) 29.98 (This is eliptical shape motor, old Round motors NOT available) Headlight 7.98 Tender (undec only) Not available at this time Traction Tires #08-110125 (4 pak) $10.98 pak Driver Set,later production version only... $34.98 Trailing Truck #08-118537 $12.98 (same as used on Pacific) Long Haul Tender shell $19.98 each (undecorated only) Pilot Truck #08-11486 $ 16.98 each


    cccccccccccccccc

    Berkshire 2-8-4 (Made by Rivarossi)

     

    Boiler shell 24.98 Motor 29.98 Headlight 5.00 Tender (undec only) Not available Traction Tire PK of 4 8.98


    Y6b 2-8-8-2 Mallet (Made by Rivarossi)

     

    Boiler shell $24.98 Motor Sorry, No motors available at this time. Headlight $ 6.00 Tender body shells only $19.98 (Sorry no tender floors available at this time) Traction Tires #08-110125 (4 pak) $10.98 pak Pilot+Trailing truck set $08-17098 $29.98


    EL-5 2-8-8-0 Mallet (Made by Rivarossi)

     

    Boiler shell 24.98 Motor Sorry, no motors available at this time Headlight 6.50 Tender (Vanderbilt, undec only) 001-003201 $44.98 Traction Tires #08-110125 (4 pak) $10.98 pak


    Challenger 4-6-6-4 (Made by Rivarossi)

     

    Boiler shell 24.98 Motor Sorry no motors available at this time Headlight 5.00 Centipede Tender (undec only) Sorry none available


    Big Boy 4-8-8-4 (Made by Rivarossi)

     

    Boiler shell 24.98 Motor $29.98 (only a few pc left of the later eliptical style, none of the old round motors available anymore.) Headlight 6.00 Centipede Tender (undec only) 001-003600 $ x.xx (sorry sold out) Traction Tires #08-110125 (4 pak) $4.98 pak Drawbar (tender side only avail.) $8.98


    N "S-2" 4-8-4 (Made by Con-Cor in China)

    NOTE:

    Most of the parts on the current production run will fit on the older "S-2" made in the 1980's. But the MOTOR and Main Frame are NOT interchangeable, and we do not have these parts for the 1980's version of the S-2 model.

     

    Boiler shell $29.98 Motor $29.98 Headlight $ 7.00 Complete Tender $49.98 Traction Tires (4 pak) $10.98 pak Drawbar (w/contacts) $ 17.98 Spur Gear Set $10.98 PIlot $17.98 Complete driver Set with valve gear $44.98 /set (only sold as set, no loose drivers available) Complete Valve gear set (sold only as set) $24.98 /set

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.

  • N 4-8-4 "Daylight" or 4-8-4 "Adaptations (Made by Con-Cor in China)

     

    Boiler shell (specify which one) $29.98 Motor $29.98 Headlight $ 7.00 Complete Tender $49.98 Tender Shell only $24.98 Traction Tires (4 pak) $10.98 pak Drawbar (w/contacts) $17.98 Spur Gear Set $8.98 PIlot $17.98 Comnplete driver Set with valve gear $44.98 /set (Only sold as set, no loose drivers available) Complete Valve gear set (sold only as set) $24.98 /set

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.


  • N Galloping Goose

     

    Motor $34.98 Dual Mode Circuit board $39.98 Loco Gear Box Front truck $29.95 Loco Gear Box Rear truck $29.95 Gear Chain detail part (2 pc) $ x.xx (sorry sold out)

  • Click here to Enter your parts orders
    On average Parts orders take 3-4 weeks to fill if we have the parts available. If not available you will get an Email or Phone call back telling you we do not have the parts. (This might also not happen for 3-4 weeks, depending on how back-logged the parts dept is and time of the year.). All parts available in limited quantities only, and subject to prior sale.





  • "N" Scale Couplers, Trucks, Mounts, Misc.


    Note: All the Truck and Coupler parts listed below are the OLD series with the "rapido flapper" couplers factory mounted.
    AND are NOT compatible with our new Con-Cor Knuckle couplers. If you do not intend to order the "old version of the "rapido flapper couplers, then do NOT use the part numbers below as you WILL GET the old versions.

    For the "New" Con-Cor Knucle couplers, (either with Micro-Trains knucle, or with "Rigid Jaw" couplers click on the link below:

    Take me to the Con-Cor Knucle Coupler conversion page.




    (N) Truck Mounting Pins/Couplers

     

    Push pins (12) 009-000065 $3.49/pkg Split pins (12) 009-000064 $3.49/pkg Rapido couplers w/springs(12)009-000066 $3.49/pkg


    (N) Freight Car Trucks

     
     

    Bettendorf Truck (pair) 009-000051 $7.98 (with old Rapido Flapper couplers) Bett Truck (Caboose) (pair) 009-000058 (no couplers) $7.98 (with old Rapido Flapper couplers) Roller Bearing Truck (pair) 009-000053 $7.98 (with old Rapido Flapper couplers) RB Truck (Caboose)(pair) 009-000059 (no couplers) $7.98 (with old Rapido Flapper couplers) RB Truck (extended bolster)(pair) 009-000054 (for 86' TOFC) $7.98 (with old Rapido Flapper couplers)


    (N) 85 Ft Smooth Side Pass Car Trucks & weight

      
    Black (pair)                 009-90TN55BLK  $9.98 (with old Rapido Flapper couplers)
    Silver (pair)                009-90TN55SIL  $9.98 (with old Rapido Flapper couplers)
    Blue (pair)(NKP cars)        009-90TN55BLU  $9.98 (with old Rapido Flapper couplers)
    Dark Green (pair)(GN cars)   009-90TN55GRN  $9.98 (with old Rapido Flapper couplers)
    Die Cast Underframe (weight) for 4000 series cars.. $5.00 each
    

    (N) Superliner Pass Car Trucks

     

    Silver (pair) 009-90TN55SIL $9.98 (with old Rapido Flapper couplers)


    (N) 85 Ft Corrug Pass Car Trucks (Rivarossi Cars)
     

    4-wheel truck (pair) Sold Out, sorry Mounting screw (4) 008-010326 $6.75 Weight (screw fits weight)(4) 008-010328 $6.75


    (N) Heavyweight Pass Car Trucks (Rivarossi Cars)

     

    6-wheel truck Sorry Sold Out... Mounting screw (4) 008-010326 $6.75 Weight (screw fits weight)(4) 008-010328 $6.75


    (N) Wheelsets

     

    Brass wheelsets (8) 009-000061 $11.98 /pkg


    (N) 85 Ft Budd Corrugated Side Pass Car Parts

     

    Trucks: Black (pair) 009-90TN55BLK $9.98 (with old Rapido Flapper couplers) Silver (pair) 009-90TN55SIL $9.98 (with old Rapido Flapper couplers) Truck mounting Screws (4) 009-000421 $5.75 Cyclinder Weight (4) 009-000422 $5.75 Flat weight (any car) 009-000423 $3.00 Dummy Couplers (8) 009-000424 $4.98 End Diaphrams (4) 009-000425 $4.98



  • 2014 Con-Cor International Ltd.

    Revised:1 Oct 2014 All rights reserved. We reserve the right change or modify at any time, product specifications, components or pricing.

    (Not all parts listed maybe in stock. Even if we are out of a part, we continue to list it, for it might be instock at one of the hundreds of dealers or distributors that buy from us, and need to use our website as a reference tool for product descriptions and pricing.) mailto:concor@con-cor.com
    (We reserve the right to correct errors and change prices without prior notice.)